Archive

Posts Tagged ‘Straight Stitch’

Where should I buy a sewing machine to get convenient repairs?

February 13th, 2013 2 comments

I do not want to have to pack up a machine and send it away. What about waranties?

Look for a local shop that sells machines and provides service. Buy a decent machine — the cheapest new machines are usually impossible to repair or too expensive to repair, and are often fairly user-hostile. If your budget is limited, I strongly suggest buying a good used machine.

Generally, with machines that are available only through dealerships, the actual warranty work is done by the dealer.

Also, generally, purely mechanical machines (not electronic or computerized, but the ones that use cams and gears and a conventional electric motor) can be serviced by virtually any sewing machine shop. Things start getting tricky when you get into the fancier machines, and you’ll just have to ask shops if they can fix a whatever…

http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick, if new was my choice:
Janome (who also does Kenmore).

Is the Singer 2638 a good sewing machine to start with?

February 7th, 2013 2 comments

I want to start making my own clothes (I have someone to teach me how) and I can buy a Singer 2638 in excellent condition for $75. Is that a good model to start with? And is $75 a good price?

Singer is not the company it once was.

http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick: Janome (who also does
Kenmore).

What type of sewing machine would you recommend?

February 5th, 2013 3 comments

Besides sewing lighter fabrics, I need to have the ability to sew light and heavy denim.

I am also very interested in any recommendation as to brands, specific models, accessories, etc. that you have found helpful.

The brands I have found locally are Singer and Kenmore.

Any advice and help is sincerely appreciated.

namaste
Not everyone who sews is a seamstress and if you look at my avatar you might well realize I will never be a seamstress in this present manifestation or life time although I might be a tailor.

namaste

Take a look at Kate Dicey’s essay on choosing sewing machines at
http://www.katedicey.co.uk (and take a look around at her site…
there are a lot of nice little tutorials there!). The FAQ she
refers to is at http://preview.tinyurl.com/l5rzu6 now.

What I want for beginners in sewing:

– a machine that doesn’t scare you

– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable — just
too frustrating to learn on!)

– very good straight stitch

– good zigzag (4-5 mm is fine, more than that is gravy)

– a method of making buttonholes that makes sense to you

– adjustable presser foot pressure (which helps some fabric
handling issues)

– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle generic
presser feet pretty well. Some brands of machines use proprietary
or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches

– triple zigzag (nice for elastic applications)

– a couple of decorative stitches (you won’t use them nearly as
much as you think)

– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine at a
specific price buying used than new and a good dealer is worth
their weight in sewing machine needles when you get a machine
problem — often they can talk you through the problem over the
phone. While you’re trying things out, try a couple of machines
(sewing only, not combo sewing-embroidery) over your price limit,
just so you can see what the difference in stitch quality and
ease of use might be. You may find you want to go for the used
Cadillac. Or you might want the new basic Chevy. Might as well
try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick, if new, decent and budget
was my choice: Janome (who also does Kenmore).

What is the best computerized sewing machine for a real beginner.?

February 3rd, 2013 2 comments

I am just starting out, although I took a class years ago, I was not very good – especially in adjusting tension and all those little things. I am getting a sewing machine now that I am retired – what would be the best? I’m thinking of a Brother XR 7700

What features do you want? Are you on a budget? Most machines will sew just fine with the upper tension set on 4 and left there. IMHO, it’s easier to teach you what a balanced stitch
looks like than try to fight through the screens of some programs to adjust something that the computer is doing "wrong".

My personal experience with Brother machines has not been good, but ymmv. I’d strongly urge you to consider trying out a number of machines at local sewing machine dealers if at all possible, and finding the machine(s) that will work for you.

My minimal criteria (I do a lot of garment making, some quilting, no machine embroidery other than freemotion): Very good straight stitch, at least a pretty good zigzag, non-jamming bobbin case, buttonhole that doesn’t drive you nuts, adjustable presser foot presser, at least a fair range of presser feet made for the machine. For my own use, I also want stretch and regular blindhem, a couple of stitches I can use for fagoting, a couple of hemstitches, and some stitches that are good for faking blanket stitches for applique. My primary machine is a 10 year old Viking electronic, middle of the line.

Because I sew so many garments, I also have a serger and a coverstitch machine — personally, I’d sooner have a good serger and a so-so sewing machine than a fancy sewing machine, but again, that’s personal preference.

Some help:
http://www.cet.com/~pennys/faq/smfaq.htm
http://www.taunton.com/threads/pages/tvt046.asp
http://www.taunton.com/threads/pages/t00130.asp
I also urge you to read the first and last chapters of Carol Ahles’ book Fine Machine Sewing (available from most libraries).

What sewing machine is best for making lingerie?

January 26th, 2013 3 comments

I am a beginner but I’d really like to get it right by buying the right type of machine (for delicate materials and basic materials like cotton to make bras etc.)

Would a serger be better? I’m a bit clueless but I’m determined to learn.
Thanks in advance to anyone who answers,

A serger is very helpful for jobs like attaching elastic and sewing covered seams, but you’ll still need a good sewing machine too. The one you’re looking for for lingerie will have adjustable stitch length and width, adjustable presser foot pressure, and will sew well with size 8/60 sewing machine needles — take a pack each of microtex points and stretch points along when you’re testing, as well as common lingerie fabrics like batiste, silk charmeuse, and stretch satin. I’d also suggest you look carefully at electronic machines because of the fine control they offer compared to mechanicals. But mechanical machines will certainly work for lingerie.

Suggested reading:
Jan Bones: Lingerie Secrets
Karen Morris: Sewing Lingerie that Fits
Kwik Sew’s Beautiful Lingerie
Singer Sewing Library’s Sewing Lingerie

Otherwise, here’s my standard beginner sewing machine advice, all of which is also applicable to you:
http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick: Janome (who also does
Kenmore).

What sewing machine to buy for hemming pants?

January 26th, 2013 2 comments

I just want to buy a simple basic sewing machine under $100 to hem my pants.

I don’t need it to do any fancy needlework. All I need is to hem my pant legs. Can anyone recommend me any brands?

Thanks alot!

If you’re going to hem pants with a straight stitched-through hem (like jeans), any decent straight stitcher will do. I typically find old Singer 99s and 15s around for $0-20 that just need cleaning, oil and a new needle.

If you want to do a more professional looking hem, such as is used on dress pants, you want a machine with a "blind hem stitch" (and ask for it to be demonstrated for you).

Or you’re going to learn to hem by hand… takes very little time and
costs you a packet of hand sewing machine needles — less than $1.

With a budget of $100, you’re either going to be going for a used machine or a new one that is not going to last long or be repairable.

My standard beginner sewing machine advice:
http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick: Janome (who also does
Kenmore).

Where can I find an inexpensive sewing machine?

January 24th, 2013 7 comments

I am looking for a small sewing machine that I can use to do repairs (hems and such) and sew small items like cat toys. I don’t want anything really fancy or expensive, but I DO want it to work well! Does anyone have any recommendations?

Ask your local sewing machine dealers about what they’ve got in used machines.

http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick: Janome (who also does
Kenmore).

What is the best name and model sewing machine ?

January 20th, 2013 2 comments

In the price range of $300 or less, what is the best sewing machine to buy? Brand name and model specific please. It would be used to create designed stitches, and would like to make button holes but not a must have.

"create designed stitches" is not a phrase I really understand…. are you trying to say that it needs to do embroidery? Or are you saying you need programmable stitch functions? Or are you telling me it will be used for a variety of garments? If you can clarify for me, I’d be happy to try further. Otherwise, here’s my advice for first sewing machines:

http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick: Janome (who also does
Kenmore).

What is a good sewing machine for a beginner?

January 18th, 2013 2 comments

I would like to learn how to sew what is a good sewing machine for a beginner?

http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick, if new was my choice:
Janome (who also does Kenmore).

What is a good sewing machine for a beginner?

January 18th, 2013 2 comments

I would like to learn how to sew what is a good sewing machine for a beginner?

http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick, if new was my choice:
Janome (who also does Kenmore).