Free Embroidery Designs

I do not want to have to pack up a machine and send it away. What about waranties?

Look for a local shop that sells machines and provides service. Buy a decent machine — the cheapest new machines are usually impossible to repair or too expensive to repair, and are often fairly user-hostile. If your budget is limited, I strongly suggest buying a good used machine.

Generally, with machines that are available only through dealerships, the actual warranty work is done by the dealer.

Also, generally, purely mechanical machines (not electronic or computerized, but the ones that use cams and gears and a conventional electric motor) can be serviced by virtually any sewing machine shop. Things start getting tricky when you get into the fancier machines, and you’ll just have to ask shops if they can fix a whatever…

http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick, if new was my choice:
Janome (who also does Kenmore).

I’m new to sewing, and I don’t know what sort of things I should watch for when buying a machine. I also don’t know what kind of price I should expect to pay if I want something that’s good enough to last me a long time, but doesn’t have gadgets I don’t need.

I hope to use it to work with cotton and linen primarily if that helps.

Thanks!

http://www.cet.com/~pennys/faq/smfaq.htm

If you’re on a budget, I’d suggest a good used machine — the cheapest new machines are often unrepairable, and are so persnickity about adjustments that they can be incredibly frustrating. I’d really sooner see you with a machine with some scuffs and nicks and only a few stitches that won’t frustrate you. When you outgrow the machine, you can always trade it in or keep it as a backup machine.

Things I want for a beginner to have in a machine:
— very good straightstitch
— good zigzag — 4 mm is plenty wide enough for most purposes.
— a method of making buttonholes that isn’t frustrating (automatic buttonholers are easier than 1 steps are easier than 4 steps, are easier than buttonhole attachments like the old Greist attachments — however, the Greists made very nice (though limited sizes) of buttonholes)
— adjustable presser foot pressure

Nice to have, but can be lived without:
— three step zigzag (great for elastic application)
— blindhem and stretch blindhem stitches (saves hours!)
— a few decorative stitches (just for fun)

If you’ve got the budget, I’d suggest considering an electronic machine — they don’t stall at slow sewing speeds the way many mechanicals will, and they sew very nicely.

I’d also send you to a real sewing machine shop… several, if possible. Tell them your budget, that you’re a beginner, and ease of use and quality is more important than all the bells and whistles. Ask to see machines in your price range, and also ask to try a couple of good quality machines outside your price range so you can see differences in quality of stitching and ease of use. (Elna, Viking, Pfaff, Bernina…) — not the embroidery machines, ask to try one they might sell to a picky person who has a separate embroidery machine.

There are quite a number of pre-loved machines around, many of which are sitting on shelves in repair shops, taken in on trade, overhauled, and ready for a new person. There can be some excellent values there.

Always ask (new or used) who will service the machine, what the turnaround time usually is, availability of parts, can it be done locally, or will warranty service require it to be shipped off elsewhere.

Suggested reading:
John Giordano: Sewing Machine Book
Carol Ahles: Fine Machine Sewing (especially the first and last few chapters on care and feeding and selection of sewing machines — also skim the chapters on hemming.
Gale Grigg Hazen: Owner’s Guide to Sewing Machines, Sergers, and Knitting Machines

Your local library is likely to have both books on the shelf.