Archive

Posts Tagged ‘Thread Colors’

I need to know more about emroidery machines?

November 25th, 2012 2 comments

I am wanting to get a machine and need to start small but I want something that can grow with my needs. I’ve seen where you can buy appliques for machines and am not sure what all that involves. Are there certain machines that you can buy extra patterns? for? And to the cheaper ones not do as much? I’ve seen some that look like a sewing machine with an extra attachment and others that almost look like small factory equipment.

An embroidery machine has a few built-in designs. Others can be downloaded from the Internet. Some are free and others are for sale. Some are 100% embroidery and others are applique done in the embroidery hoop.

The one I usually recommend is the Brother SE 400. Right now everyone seems to be out of stock until mid-February. This is online. Your local Walmart may have this model in stock.

Visit a Brother sewing machine dealer and ask for a demo. They may have a model that is close in price to the SE 400, which is a combo (sewing and embroidery machine) or one that they have taken in on a trade-up.

It would be best to buy from a dealer even though you will be paying a little bit more (Walmart and Amazon have the SE 400 for around $400). With the dealer you will have access to lessons as well as assistance and service for the machine when necessary.

Machine applique designs come with an instruction PDF that will give you fabric and thread colors; indicate when to place the fabric on the stabilizer and when to trim for the next step. Each section of the fabric is sewn in place with a running stitch and then finished with a satin stitch.

If this is a priority, ask if it can be included in the demo.

This site may add further insight as to what can be done and how to do it – http://www.emblibrary.com/EL/elprojects/holder.aspx?page=techniques

What is the best embroidery machine to buy to start my business?

November 13th, 2012 7 comments

I want to eventually have a substantially large embroidering and altering business and need a few pointers on what to start with.

You should call Mr. Vac and Mrs. Sew and ask them about their commercial machines. I know my friend just started an embrodery business (she is doing great by the way) and she just purchased the Ricoma 12-Needle Commercial Embroidery Machine. The Ricoma is the best commercial machine available that gives you the most bang for your buck. The Ricoma is a true commercial machine. It will run at 1,000 Stitches Per Minute. The Ricoma also has twelve needles which is great for a person starting a business or is producing the same thing over and over again. I know from experience that many designs, logos etc. use more than 6 colors (say like the PR-600) and changing the thread colors constantly is gets fairly boring and eats up a lot of time. However with the Ricoma you can have up to 12 Needles and you can sew many designs and logos that have over 6 colors. The Ricoma also comes with many more extras. With the Ricoma you have an embroidery field of 13" x 19.5" THAT IS HUGE!!! The Ricoma comes with 2, that’s right , 2 cap hoops and is able to embroider on an astonishing 270 degrees of the cap. You also receive with the Ricoma 2 Shirt Front Round Hoop 9 cm (3.5"), 2 Shirt Front Round Hoop 12 cm (4.7"), 2 Shirt Front Round Hoop 15 cm (5.9"), 2 Shirt Front Round Hoop 23 cm (9"), 2 Jacket Back Square Hoop 30 x 30 cm (12" x 12"), 1 Sash Frame 56 x 38 cm (22" x 15") and of course the 2 cap hoops. But they give you 2 sets of every hoop (except the Sash Frame) which is important because if you were going to embroider say 50 bags. You can hoop one bag and embroider on that one, then hoop the other and wait until the one being embroidered on is done and put the hoop that is already hooped in the machine. This will save you a lot of time because you can always have the machine embroidering and there would be no lag time in between because you will always have a pre-hooped hoop on hand. With the Ricoma you also will receive a FREE!!! full digitizing program worth well over $2000 .This state-of-the-art software package allows you to create your own embroidery designs from scanned images, clip art, logos, and more. The Embroidery Software’s easy-to-use drawing tools make digitizing a simple task, even for beginners. This software has no limitations and grows with your business. Adding text to your designs is easily accomplished using the lettering tool, which is compatible with true type fonts as well as the pre-digitized fonts included with the software. Import bitmap or vector graphics and use the embroidery software’s One-Touch auto-digitizing feature to convert them to stitches with a few easy clicks. With this software you be easily and quickly able to transform artwork and lettering to high quality embroidery. The Ricoma also comes with a stand with wheels for easy movement FREE!!! You also receive 8,000 Stock Embroidery Designs with the machine FREE!!! You also will receive a Gunold Introductory Kit which is full of a variety of top embroidery products. It contains Sulky‚rayon spools, Gunold Poly‘ spools, bobbins, scissors, needles, touch-up pen, small can of KK-2000‘, Puffy Foam‘ pack, Perforated Solvy‚ Filmoplast‚ three types of backings, color cards, information sheets and more. This kit is great for Embroidery businesses just starting out.

And if that was not enough you will receive a FREE!! Approx. 7 hour training on how to use your machine.

Best of all my friend got the Ricoma on sale for only $9999 with free shipping and no tax because she does not live in New York.

Here is a link:

http://www.mrvacandmrssew.com/go/product/id/832

where can i find free digitizing software for embroidery machines?

November 9th, 2012 2 comments

my mother have a embroidery machine and i want to find the software for her. please help me.

Here is a completely free software program that is new:

http://www.sophiesew.com/SSDLP/Gallery.php

This is completely free font building software:

http://www.embroiderydesigns.com/productdetails/Internet+Stitch/Softwares/1/EFP.aspx

Here are some sites for free trials:

http://www.embird.com/

http://www.embroiderytw.com/downloadeng.htm

http://www.buzztools.com/demo_menu.asp

In my opinion, BuzzTools and Embird are the easiest and not too expensive. Your mother could try it out before she bought it to see if it’s something she really wanted to do.

If she just needs to change thread colors and convert formats, this is a good free program for that:

http://www.eos3.com/index.php?en