Home > Embroidery Library > What kind of sewing machine to get?

What kind of sewing machine to get?

December 5th, 2012 Leave a comment Go to comments

Trying to decide what kind of sewing machine to get. I’m essentially a beginner, interested in quilting, making stuffed animals, and clothing. I’ve gotten conflicting advice regarding computerized vs mechanical machines.

I’ve had people tell me I need a computerized machine that has all the bells and whistles and embroidery and stuff

Others have said I need a good used mechanical machine that will have fewer functions but be more durable.

Any input or recommendations would be appreciated.

http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick: Janome (who also does
Kenmore).

  1. chicagirl51
    December 5th, 2012 at 23:37 | #1

    Get a basic sewing machine and you can always upgrade later on after you get the hang of it. I have had the same sewing machine for over 40 years and it has never been to the shop.It is a singer touch & sew-first one to come out.
    http://www.morekitchenappliances.com/Singer-7462-SGC1002.html
    http://www.walmart.com/catalog/product.do?product_id=4764724
    References :

  2. Tertia
    December 5th, 2012 at 23:56 | #2

    I found the main consideration was whether I wanted electric or hand powered- this is when I first started as I had seen all my mates in sewing class run their thumbs through the electric machines and It rather put me off. But I found a Singer with 2 speeds and took a chance and am glad I did. It doesn’t do embroidery, but everything else including buttonholes. I have made curtains and clothes and lots of mending.
    I didn’t get it ‘new’ – I bought it from the Singer shop as a 6 months old trade-in. I was told the previous owner had it as a ‘status piece’ and never used it, she had just traded it in for the latest model as soon as the new one became available. This I can well believe- she saved me several hundred pounds.
    If you do buy used make sure you get the full and proper instruction booklet, don’t assume you can pick one up on the interent because sometimes you can’t.
    References :
    mine is a Singer 2001 – touch display

  3. kay
    December 6th, 2012 at 00:45 | #3

    http://www.cet.com/~pennys/faq/smfaq.htm

    What I want for beginners in sewing:

    – a machine that doesn’t scare you
    – a machine that isn’t balky (cheap new machines are often very
    balky or need adjustments often and are rarely repairable —
    just too frustrating to learn on!)
    – very good straight stitch
    – good zigzag (4-5 mm is fine, more than that is gravy)
    – a method of making buttonholes that makes sense to you
    – adjustable presser foot pressure (which helps some fabric
    handling issues)
    – accessory presser feet that don’t cost an arm and a leg
    (machines that use a "short shank foot" typically handle
    generic presser feet pretty well. Some brands of machines use
    proprietary or very expensive presser feet)

    If the budget stretches far enough:

    – blindhem and stretch blindhem stitches
    – triple zigzag (nice for elastic applications)
    – a couple of decorative stitches (you won’t use them nearly as
    much as you think)
    – electronic machine because of the needle position control and
    because the stepper motors give you full "punching force" at
    slow sewing speeds — mechanical machines often will stall at
    slow speeds.

    Please go to the best sewing machine dealers around and ask them
    to show you some machines in your price range, *especially* used
    machines you can afford. You’ll get a far better machine buying
    used than new, and a good dealer is worth their weight in sewing
    machine needles when you get a machine problem — often they can
    talk you through the problem over the phone. While you’re trying
    things out, try a couple of machines (sewing only, not combo
    sewing-embroidery) over your price limit, just so you can see
    what the difference in stitch quality and ease of use might be.
    You may find you want to go for the used Cadillac. Or you might
    want the new basic Chevy. Might as well try both out.

    Suggested reading: John Giordano’s The Sewing Machine Book
    (especially for used machines), Carol Ahles’ Fine Machine Sewing
    (especially the first and last few chapters) and Gale Grigg
    Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
    Machines. All of these are likely to be available at your public
    library.

    Used brands I’d particularly look for: Elna, Bernina,
    Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

    New "bargain brand" I’d probably pick: Janome (who also does
    Kenmore).
    References :
    50 years of sewing; amateur sewing machine mender
    Current machines: Viking midline electronic, ca 1995; two Singer straight stitchers from the early 1950’s, my grandmother’s White straightstitcher from the late 40’s, two sergers and a coverstitch machine

  1. No trackbacks yet.