Archive

Posts Tagged ‘Presser Foot’

What is a good sewing machine for a beginner?

January 18th, 2013 2 comments

I would like to learn how to sew what is a good sewing machine for a beginner?

http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick, if new was my choice:
Janome (who also does Kenmore).

What is the best brand of sewing machine to buy?

January 16th, 2013 6 comments

I don’t have a lot of money to spend, so I want to make sure I am at least buying the right brand.

Please, if you want, also mention why, or some pros and cons

Take a look at Kate Dicey’s essay on choosing sewing machines at
http://www.katedicey.co.uk (and take a look around at her site…
there are a lot of nice little tutorials there!). The FAQ she
refers to is at http://preview.tinyurl.com/l5rzu6 now.

What I want for beginners in sewing:

– a machine that doesn’t scare you

– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable — just
too frustrating to learn on!)

– very good straight stitch

– good zigzag (4-5 mm is fine, more than that is gravy)

– a method of making buttonholes that makes sense to you

– adjustable presser foot pressure (which helps some fabric
handling issues)

– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle generic
presser feet pretty well. Some brands of machines use proprietary
or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches

– triple zigzag (nice for elastic applications)

– a couple of decorative stitches (you won’t use them nearly as
much as you think)

– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine at a
specific price buying used than new and a good dealer is worth
their weight in sewing machine needles when you get a machine
problem — often they can talk you through the problem over the
phone. While you’re trying things out, try a couple of machines
(sewing only, not combo sewing-embroidery) over your price limit,
just so you can see what the difference in stitch quality and
ease of use might be. You may find you want to go for the used
Cadillac. Or you might want the new basic Chevy. Might as well
try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick, if new, decent and budget
was my choice: Janome (who also does Kenmore).

How good is portable sewing machines

January 6th, 2013 5 comments

Hi, I m planning to purchase a portable sewing machine.Can anyone suggest which is the best one functionally and wat wud be its cost(approx.).I need a sewing machine for jest small purposes like altering my dresses, stitching cusion covers, stitching borders, and other alteration works. I want to know is it worth purchasing a portable one.
Where can i get a portable sewing machine in pune(india)

Portable home sewing machines are every bit as versatile as cabinet machines in the same class, and should be able to handle the tasks you’ve outlined. However, the hand-held machines are pretty worthless– an office stapler would do as well. Maybe better.

The brands of Indian machines I’ve seen advertized are not familiar to me, but here’s my standard suggestions for beginners buying a machine:

http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.
Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick: Janome (who also does
Kenmore).

What’s a good sewing machine for someone beginning to make clothing?

January 4th, 2013 5 comments

I’ve started making my own clothes recently (mainly reconstructing old clothes), but I don’t have a sewing machine so I’ve been having to do it all by hand. What is a good, basic sewing machine that can speed things up a bit? I want to not only continue reconstructing clothes, but possibly making jackets, dresses, shirts, etc. from scratch. So it needs to be able to handle some more heavy-duty projects, too.

If you’re on a budget, I highly recommend a used machine. Even a straight stitcher from the thrift store or the back of someone’s closet will do well for you if you’re working entirely with wovens. You *can* sew knits with a straight stitcher, but it takes some special techniques.

Here’s my standard advice for beginners in need of sewing machines:
http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick: Janome (who also does
Kenmore).

Sewing machine for beginner who wants to start designing handbags?

January 2nd, 2013 5 comments

I don’t know how to sew, but I am learning so I’m a beginner. I want to start designing handbags and am looking for a great beginner sewing machine for a good price (no more than 200 dollars) that will help me to start. Any suggestions?

Website links would be nice.

For most handbag fabrics, you’re looking for power, and I can’t think of a new $200 machine that will give that to you. You’d be far better off with a good used machine. Be sure, when you’re shopping, to bring samples of the sorts of materials you want to sew.

http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick: Janome (who also does
Kenmore).

What is the best type of sewing machine to buy for a reasonably low price?

December 31st, 2012 3 comments

I want to start making my own clothes but I don’t want to buy a lousy sewing machine.

A used one. Here’s my standard advice for beginners:

Start with reading the following faq — my comments expand on it:
http://www.cet.com/~pennys/faq/smfaq.htm

—-
What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick: Janome (who also does
Kenmore).

What is a good sewing machine that can do decorative stitches as well as basic stitches for a reasonable price?

December 29th, 2012 6 comments

I need something that wont cost an arm and a leg, thats relatively easy to use and can do decorative stitches as well as general day to day sewing. Any suggestions? Im okay with used or older machines but I would need to know where to buy them used. Thanks!

Take a look at Kate Dicey’s essay on choosing sewing machines at
http://www.katedicey.co.uk (and take a look around at her site…
there are a lot of nice little tutorials there!). The FAQ she
refers to is at http:// tinyurl. com /l5rzu6 now. (paste back together– yahoo is being strange)

What I want for beginners in sewing:

– a machine that doesn’t scare you

– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable — just
too frustrating to learn on!)

– very good straight stitch

– good zigzag (4-5 mm is fine, more than that is gravy)

– a method of making buttonholes that makes sense to you

– adjustable presser foot pressure (which helps some fabric
handling issues)

– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle generic
presser feet pretty well. Some brands of machines use proprietary
or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches

– triple zigzag (nice for elastic applications)

– a couple of decorative stitches (you won’t use them nearly as
much as you think) (and you can build up some interesting decorative bands from the common utility stitches), as well as make them look different with bobbin work:
http://www.threadsmagazine.com/item/5025/bobbin-work-when-threads-are-too-thick-for-the-needle
http://www.threadsmagazine.com/item/4978/crazy-patchwork-by-machine

– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine at a
specific price buying used than new and a good dealer is worth
their weight in sewing machine needles when you get a machine
problem — often they can talk you through the problem over the
phone. While you’re trying things out, try a couple of machines
(sewing only, not combo sewing-embroidery) over your price limit,
just so you can see what the difference in stitch quality and
ease of use might be. You may find you want to go for the used
Cadillac. Or you might want the new basic Chevy. Might as well
try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick, if new, decent and budget
was my choice: Janome (who also does Kenmore).

What is the best and easy brand sewing machine for a beginner with zero experience in sewing?

December 25th, 2012 4 comments

Haven’t sewed anything since junior high and totally have no recollection of anything including threading a bobbin. HELP!!! I want to start off with a machine that is easy to use and cheap. Just in case I mess it up it’s not a lot of expense out of my pocket.

http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick, if new was my choice:
Janome (who also does Kenmore).

What kind of sewing machine to get?

December 5th, 2012 3 comments

Trying to decide what kind of sewing machine to get. I’m essentially a beginner, interested in quilting, making stuffed animals, and clothing. I’ve gotten conflicting advice regarding computerized vs mechanical machines.

I’ve had people tell me I need a computerized machine that has all the bells and whistles and embroidery and stuff

Others have said I need a good used mechanical machine that will have fewer functions but be more durable.

Any input or recommendations would be appreciated.

http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick: Janome (who also does
Kenmore).

Can you embroider on a Singer 7430 Sewing Machine?

November 29th, 2012 2 comments

My sewing machine has a lot of "built in stitches" besides monogram…I was wondering if I could use it for embroidery..
I hate to have to have a special machine for the little bit of embroidery that I would want to do…

So long as your sewing machine can do zigzag stitches, go in reverse and forward and you can set the machine with zero pressure on the pressure foot, you can make some pretty darned cool embroidery. Just so long as you’re not trying to make precise stitches, as you would need for monograms.

What you need: An embroidery hoop, practice cloth, lots of thread, paper to back the design. A rough idea of what you want to do, as well as a washable drawing medium such as a chalk pencil. This works especially well on smaller, more free-form designs.

How to do it: Set the stitch for zigzag, draw the design on cloth, back with paper, set in hoop. Place under presser foot, with no pressure on foot. Go back and forth over drawing, experimenting with stitch length and bobbin tension. Caveat: doing this free-hand will not produce the smooth, professional style embroidery. More of an artisan style.

These instructions came with my sewing machine and I’ve used them with varying degrees of success. If you’d like more info, please just e-mail me; I’d hate to type exact instructions if you’re not interested!