Free Embroidery Designs

I want to learn how to sew. i want do be able to make dresses for my two little girls and start selling some I make but first I need a sewing machine. I saw a Singer Futura CE-150 Sewing and Embroidery Machine at walmart because I would also like to embroider but costs $539 and I cannot afford that. Does anyone have any suggestions on a good sewing machine.

For embroidery, consider learning to do free motion embroidery on a sewing machine… any sewing machine will do. Here’s a pro working — though his setup is a little easier, it’s the same idea:
http://www.threadsmagazine.com/item/3833/video-manuels-free-motion-embroidery-technique
And something less fancy: http://www.youtube.com/watch?v=F8hFRab26BE

As far as a sewing machine, I’d definitely suggest you want to get a model with a blindhem stitch… otherwise my basic suggestions are below. Please note that using a home sewing machine for business voids the warranty (they’re not meant for the duty cycle of sewing for a business), and that as soon as you learn the basic machine operation, I’m going to strongly suggest that you want to borrow Carol Ahles’ book, Fine Machine Sewing, from the library and at least learn her methods of machine blindhemming — it’ll save you lots and lots of time.

If you truly are going to use home machines to make stuff to sell, I’d buy a basic sewing machine (see below) and a decent 4 thread serger ASAP. Add computerized embroidery to that if you wish later.

My basic beginner sewing machine rant:
Take a look at Kate Dicey’s essay on choosing sewing machines at
http://www.katedicey.co.uk (and take a look around at her site…
there are a lot of nice little tutorials there!). The FAQ she
refers to is at http://preview.tinyurl.com/l5rzu6 now.

What I want for beginners in sewing:

– a machine that doesn’t scare you

– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable — just
too frustrating to learn on!)

– very good straight stitch

– good zigzag (4-5 mm is fine, more than that is gravy)

– a method of making buttonholes that makes sense to you

– adjustable presser foot pressure (which helps some fabric
handling issues)

– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle generic
presser feet pretty well. Some brands of machines use proprietary
or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches

– triple zigzag (nice for elastic applications)

– a couple of decorative stitches (you won’t use them nearly as
much as you think)

– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine at a
specific price buying used than new and a good dealer is worth
their weight in sewing machine needles when you get a machine
problem — often they can talk you through the problem over the
phone. While you’re trying things out, try a couple of machines
(sewing only, not combo sewing-embroidery) over your price limit,
just so you can see what the difference in stitch quality and
ease of use might be. You may find you want to go for the used
Cadillac. Or you might want the new basic Chevy. Might as well
try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick, if new, decent and budget
was my choice: Janome (who also does Kenmore).

I’m a student and i work primarily on a tabletop juki machine. They are very fast and i can get allot done in very little time. But I’m going to be moving soon and i will need a machine that can complete all different types of garments at a relatively fast pace.
Can I complete the same in of work at the same pace with a home sewing machine?

Thanks for the help.

Yes, and no. There are a few models of home machines that are designed for pros and do work at a faster speed than others. Janome produces a professional model, the MC6600P machine that sews 1200 stitches a minute straight stitch. The el-cheapo machine at wal mart or Target…not so fast. Or as reliable. if you are used to the speed and the stitch quality offered by a fast machine then the majority of the home machines will be far too slow and you’ll be waiting for the machine to catch up to you.

Since you do so much sewing the professional model is a much better investment. It looks like a home machine on the outside, but inside it has the speed and stitch quality that a professional advanced sewer needs. It will complete a wide variety of garments quickly and efficiently. It has lots of utility stitches and a good variety of decorative stitches too. It doesn’t do pre-programmed hooped embroidery -which is a good thing! You can do free motion embroidery easily. It is a table top home machine with the motor and head in one unit.

If you wish to buy an industrial machine that does a variety of stitches then the Bernina 950 is a good machine. It is a true industrial meaning the table, motor and head are separate. It offers 14 stitches and a semi automatic buttonhole.

Here are the two machines:
http://www.berninausa.com/product_detail-n2-i223-sUS.html and in it’s price for purchase with table, motor, and head: http://www.allbrands.com/products/abp00796-0070.html
The Janome worthy of your talents: http://www.janome.com/index.cfm/Machines/Sewing-Quilting/MC6600P

I have several industrials and I find many home machines far too slow. I run home machines at a "pedal to the metal" speed and I find the Janome is the closest to industrial speed. Most domestic home machines, even the expensive brands, don’t have the same level of speed that a pro is accustomed to. Hope that helped a bit.