Archive

Posts Tagged ‘Format Conversion’

I am going to purchase a Janome 300e embroidery machine. What is the format for the 300e: Art. Dst. Exp. jef?

November 19th, 2012 2 comments


jef is the format you need.

If you find a design you like, but does not come in .jef format, there is a free conversion program that you can download and use. Pulse Ambassador is the software.

Designs that you download from the Internet will be zipped and you have to unzip or extract before they can be used. Windows is the support system for machine embroidery software and neither Windows, nor Mac can read a zipped file.

Another caveat, is the hoop size which normally indicates the limitation of the design that can be embroidered.

Create a folder on your hard drive for the downloads. As you find designs that you like, save to the folder, then unzip and use the new file.

where can I find free machine embroider software?

November 11th, 2012 1 comment

I would like to re-size designs and catalog and more.

The only freebie is Pulse Ambassador and it is for format conversion.

Embrilliance Thumbnailer is around $40 and it is a catalog that you can use with Mac or Windows. No machine embroidery program is needed – http://www.britonleap.com/

As for re-sizing, you do need a software program for this that will add or subtract stitches.

Re-sizing can be done in small % with the embroidery machine, but the stitch count remains the same.

To much enlarging and you get thin/open areas in the design.

Too much reducing and you get "bulletproof" embroidery, which is stitching on top of stitching that makes the design stiff.

Embird is a very popular brand and is the least expensive machine embroidery software.

You start with the basic program for $131.00 and then add other programs as you become more proficient or have the need.

As with most machine embroidery software programs, this one can only be used with Windows – http://www.secretsof.com/content/1853