Home > Free Disney Embroidery Designs > Machine Embroidery on Brother BM-2600 sewing machine?

Machine Embroidery on Brother BM-2600 sewing machine?

November 15th, 2012 Leave a comment Go to comments

On the Brother BM-2600 sewing machine, can the feed dog drop for free-hand machine embroidery?
On the Brother BM-2600 sewing machine, can the feed dog drop for free-hand machine embroidery?

Yes u can do free motion embroidery but you will need a darning
foot which is sold seperatly for about $15 from brother but u will need the code which is in the your manual so u know you have the right 1

also u will need a hand embroidery hoop ,stabilizer and a design that u want 2 stitch out like a car or a Disney character.

the darning foot is a screw on. and cover feed dog with ur darning plate

  1. Clare
    November 15th, 2012 at 16:52 | #1

    According to the specs, it has a plate to cover the feed dogs for free motion work and it doesn’t mention being able to drop the feed dogs.

    http://www.brother.com.au/homesewing/products/products.asp?ProductID=187&SubCategoryID=11

    In the online manual for the machine, it says "Preparing for Monogramming and Embroidering –
    Remove the power supply plug from the
    outlet. Place the darning plate on the needle
    plate, and reconnect the power supply plug to
    the wall outlet."

    http://www.brother.com.au/PDF/Clients/CustomerSupport/Operation_Manual_BM-2600.pdf
    .
    You also need to put the darning plate on to sew on buttons.
    References :

  2. kay
    November 15th, 2012 at 17:33 | #2

    You can also just cover the feed dogs with a piece of thin, stiff plastic taped down. Set the stitch length to 0 so the feed dogs don’t move while you’re FME.
    References :
    45+ years of sewing

  3. Akhil s hehe
    November 15th, 2012 at 17:54 | #3

    Yes u can do free motion embroidery but you will need a darning
    foot which is sold seperatly for about $15 from brother but u will need the code which is in the your manual so u know you have the right 1

    also u will need a hand embroidery hoop ,stabilizer and a design that u want 2 stitch out like a car or a Disney character.

    the darning foot is a screw on. and cover feed dog with ur darning plate
    References :
    got the same machine and do free motion embroidery.

  1. No trackbacks yet.