Free Embroidery Designs

download free embroidery designs
Amazing designs embroidery
free embroidery download designs

Duration : 0:6:20

Read more…

I don’t have a lot of money to spend, so I want to make sure I am at least buying the right brand.

Please, if you want, also mention why, or some pros and cons

Take a look at Kate Dicey’s essay on choosing sewing machines at
http://www.katedicey.co.uk (and take a look around at her site…
there are a lot of nice little tutorials there!). The FAQ she
refers to is at http://preview.tinyurl.com/l5rzu6 now.

What I want for beginners in sewing:

– a machine that doesn’t scare you

– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable — just
too frustrating to learn on!)

– very good straight stitch

– good zigzag (4-5 mm is fine, more than that is gravy)

– a method of making buttonholes that makes sense to you

– adjustable presser foot pressure (which helps some fabric
handling issues)

– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle generic
presser feet pretty well. Some brands of machines use proprietary
or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches

– triple zigzag (nice for elastic applications)

– a couple of decorative stitches (you won’t use them nearly as
much as you think)

– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine at a
specific price buying used than new and a good dealer is worth
their weight in sewing machine needles when you get a machine
problem — often they can talk you through the problem over the
phone. While you’re trying things out, try a couple of machines
(sewing only, not combo sewing-embroidery) over your price limit,
just so you can see what the difference in stitch quality and
ease of use might be. You may find you want to go for the used
Cadillac. Or you might want the new basic Chevy. Might as well
try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick, if new, decent and budget
was my choice: Janome (who also does Kenmore).

I always feel like i have a "book" in me, but when I try to sit down and write my mind goes blank! I cant help thinking everything I write is utter crap.

Also I want to be better at needlework and stuff like that but I’m so clumsy! How do I just get better at creative/artistic stuff?

I’ve always believed that ‘inspiration’ is the key to most creativity in life. As a professional artist, I am still constantly in search of that tiny spark which, I know, will ignite my passion and energies.

You need to relax and not force yourself to create that story or piece of needlework because you may believe something inside of you says it ‘has to happen’ right there and then.

Which sort of writers inspire you? Would you see yourself as a future J.K. Rowling or a modern day Jane Austen? Read up on the great works of literature or, better still, browse through some of the short stories in magazines and papers; most of these have been submitted by people just like you. They can be the springboard for bigger things ahead.

Don’t assume everything you write is rubbish. Even if an editor rejects it, that still doesn’t mean it’s no good. You really need to persist … rather like a terrier with a rag. Believe me, I ought to know!

Contemporary embroidery is also an art not to be sneezed at. Have a look at the V&A museum or, if you can’t get there, go to the library and read up on their history of great art and crafts. I am sure you can find art & craft fairs locally to give you inspiration (plus a few handy tips!) especially as the festive season approaches.

If you think you ‘have it in you’ then, frankly, you obviously have. Sit down, take a deep breath, and tell yourself you can do it!

Good luck!

I am starting to plan next years curriculum and want to include home management/life skills as a subject this year. I was wondering if anyone knew of some good web sites or curriculum’s. Also any ideas that you might have or things you have done with your girls would be helpful.

I think I have the book for you. It is Christian, but I think anyone could use it-and just taylor it. I have 4 boys, and they have a "boy’s" version and a "girl’s" version, but I use both. The name of the book is Keepers at home.

http://www.keepersofthefaith.com/Catalog/lkf/ProductSearch.asp

The book covers such areas as:

Creative Skills: basketweaving, calligraphy, candlemaking, candlewicking, ceramics, counted cross stitch, crewel embroidery, crochet, decoupage….though to weaving…

Homemaking: Baking, budgeting, cake decorating, camping, cleaning, cooking, fire safety, first aid, food preservation, gardening, health and fitness, home decorating, hygiene…through to soapmaking

Knowledge and Skills: biography, computer, foreign language, genealogy, library, literature, music, poetry, sign language… through to writing

Nature: birds, butterflies, flowers, horses, insects, pets, trees, wildflowers,

Other: bus worker, child care, church, ecology, etiquette, etc…

Recreational Activities: badminton, bicycle, croquet, hiking, ice skating, swimming, etc…

It has 374 pages, so obviously it doesn’t go in depth on any one subject, but tells you what to do to cover them. Kind of the same way scouting would cover things for badges.

Do you use all the attachments or just the basic ones,?
Do you use your machine a lot or just in rare occasions ?
Is it really worth spending a lot of money on a machine when at the end you only use it so rarely?
What is your opinion ?

I sew virtually all of my family’s clothes on a Juki 5 thread serger and a 12+ year old midline Viking electronic sewing machine with 30 stitches. I rarely use the decorative stitches (just not our style), but do use the utility stitches. I don’t use any attachments (if you’re talking about stuff like a Griest buttonholer) because the machine has a good keyhole and straight buttonhole included that can be made any size. I do use a lot of specialty presser feet, including joining, blindhem, edge stitching, narrow hemmers, zipper feet and cording feet. I do not do machine embroidery except for a bit of freehand work — I don’t like the flat look of machine embroidery.

If you’re interested in exploring what a machine can do with (mostly) utility stitches, there are three books you should consider from your library:

Carol Ahles: Fine Machine Sewing

Nancy Bednar: Encyclopedia of Sewing Machine Techniques.

Singer Instructions for Art Embroidery and Lacework (an amazing book that’s been reprinted several times, showing decorative techniques done with a straight stitch only treadle sewing machine. Remarkable stuff.)

If you’re considering buying a new machine, buy one with the basic stitches and a few decorative stitches — don’t buy a machine by number of stitches per dollar spent… you’ll probably regret it. And please distinguish between stitches and "stitch functions".

If I were to lose both of my main machines tomorrow, I’d probably replace the serger with another good 5 thread machine, perhaps a tier up in the Juki line from what I’ve got, and I’d probably buy a straight stitch only industrial needlefeed machine, and stick a Greist buttonholer on a garage sale straightstitcher for buttonholes.

free embroidery designs
download free embroidery designs
embroidery library free embroidery designs

Duration : 0:7:11

Read more…

It is a New Home Model 609. Says CHAIN STITCH on upper left. Probably from the 70’s. It has 29 stitch patterns + buttonhole stitch settings. It is a nice machine. Obviously it must lockstitch, I don’t know. I’m confused. I read about chain stitches and lockstitches. Still confused.

Chainstitch ability is relatively rare among home machines (though it’s now found on a serger fairly commonly). I suspect one of the stitches the machine is capable of is a two-thread chainstitch, which can be useful for something like embroidery or basting. The other stitches are probably standard lockstitches.
You may need an adapter of some sort to get the chainstitch.

Try out the stitches. You’re looking for one that looks like straight stitch on top, but the bobbin thread makes a chain on the bottom:
check figure 1 here: http://www.sewnews.com/library/sewnews/library/aamach22.htm or you’re looking for a 1 thread chainstitch like this, done by a chenille machine:
http://www.chholderby.com/Embroidery/chenille.htm

Here are some chainstitched examples from an old Willcox & Gibbs treadle:
<http://www.thetreadlersvillage.com/Chainstitch_Machine_Projects.html> Farther down the page is a piece of a Kenmore manual showing converting a lockstitch capable machine to a chainstitch. Some of the older machines did a 1 thread chainstitch.

Lockstitch looks like the diagram on this page– same top and bottom:
<http://www.moah.org/exhibits/archives/stitches/tech.html>

My MIL’s clothes, when she was a girl, were made on a Willcox and Gibb chainstitcher she now owns. When she wanted to get sent home from school, she’d unravel part of her dress. She found the chainstitch very helpful in that endeavor. <g>

You might try asking questions specific to your machine in the yahoo group "wefixit" — it’s a group of sewing machine "shade tree mechanics" and includes a number of professional machine repair people. There is a tremendous collective knowledge pool in that group, and I wouldn’t be surprised to find someone might be able to tell you exactly how to set up your machine for chainstitching.

Hi, I m planning to purchase a portable sewing machine.Can anyone suggest which is the best one functionally and wat wud be its cost(approx.).I need a sewing machine for jest small purposes like altering my dresses, stitching cusion covers, stitching borders, and other alteration works. I want to know is it worth purchasing a portable one.
Where can i get a portable sewing machine in pune(india)

Portable home sewing machines are every bit as versatile as cabinet machines in the same class, and should be able to handle the tasks you’ve outlined. However, the hand-held machines are pretty worthless– an office stapler would do as well. Maybe better.

The brands of Indian machines I’ve seen advertized are not familiar to me, but here’s my standard suggestions for beginners buying a machine:

http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.
Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick: Janome (who also does
Kenmore).

I’ve started making my own clothes recently (mainly reconstructing old clothes), but I don’t have a sewing machine so I’ve been having to do it all by hand. What is a good, basic sewing machine that can speed things up a bit? I want to not only continue reconstructing clothes, but possibly making jackets, dresses, shirts, etc. from scratch. So it needs to be able to handle some more heavy-duty projects, too.

If you’re on a budget, I highly recommend a used machine. Even a straight stitcher from the thrift store or the back of someone’s closet will do well for you if you’re working entirely with wovens. You *can* sew knits with a straight stitcher, but it takes some special techniques.

Here’s my standard advice for beginners in need of sewing machines:
http://www.cet.com/~pennys/faq/smfaq.htm

What I want for beginners in sewing:

– a machine that doesn’t scare you
– a machine that isn’t balky (cheap new machines are often very
balky or need adjustments often and are rarely repairable —
just too frustrating to learn on!)
– very good straight stitch
– good zigzag (4-5 mm is fine, more than that is gravy)
– a method of making buttonholes that makes sense to you
– adjustable presser foot pressure (which helps some fabric
handling issues)
– accessory presser feet that don’t cost an arm and a leg
(machines that use a "short shank foot" typically handle
generic presser feet pretty well. Some brands of machines use
proprietary or very expensive presser feet)

If the budget stretches far enough:

– blindhem and stretch blindhem stitches
– triple zigzag (nice for elastic applications)
– a couple of decorative stitches (you won’t use them nearly as
much as you think)
– electronic machine because of the needle position control and
because the stepper motors give you full "punching force" at
slow sewing speeds — mechanical machines often will stall at
slow speeds.

Please go to the best sewing machine dealers around and ask them
to show you some machines in your price range, *especially* used
machines you can afford. You’ll get a far better machine buying
used than new, and a good dealer is worth their weight in sewing
machine needles when you get a machine problem — often they can
talk you through the problem over the phone. While you’re trying
things out, try a couple of machines (sewing only, not combo
sewing-embroidery) over your price limit, just so you can see
what the difference in stitch quality and ease of use might be.
You may find you want to go for the used Cadillac. Or you might
want the new basic Chevy. Might as well try both out.

Suggested reading: John Giordano’s The Sewing Machine Book
(especially for used machines), Carol Ahles’ Fine Machine Sewing
(especially the first and last few chapters) and Gale Grigg
Hazen’s Owner’s Guide to Sewing Machines, Sergers and Knitting
Machines. All of these are likely to be available at your public
library.

Used brands I’d particularly look for: Elna, Bernina,
Viking/Husqvarna, Pfaff, Singer (pre 1970), Juki, Toyota

New "bargain brand" I’d probably pick: Janome (who also does
Kenmore).

So Easy just watch Video :DD get 3700 coins!!!
boggle solver link- http://www.cse.unr.edu/~cohen/bogl.php

Duration : 0:5:49

Read more…